MT1 Monster Tower Bimini Top

Please measure your MT1 Monster Tower following the simple instructions below so you know what size of bimini top you need.  You need to have installed your MT1 Monster Tower prior to measuring and ordering the top.  The bimini tops are custom made to your color selection and size specifications and cannot be returned.  This bimini top does not fit the MT2 Monster Tower.

Measure your MT1 Monster Tower for a Tower Bimini Top      

Tower Bimini Top 1) Measure the distance between the rear Heim joints on your MT1 Monster Tower as show in the photo.  The tower bimini top is sized based on the distance from the center of the left rear Heim joint the center of the right rear Heim Joint. 
 
2) Please take into account where the rear legs are when ordering the bimini. If the rear mounts are not close to the back of the driver's seat it is possible that the bimini will not cover the driver / console. Bimini length is 59".

3) Please ensure clearance for the socket base mount when the tower is in both the up and folded down positions.  The base is 1" x 1" x 1", to be centered 2.5" above the weld at the bottom of each rear leg on the inside and extends 2" away from the rear leg.  Be sure you have at bit more than 2" of clearance for the mount to against the boat and the windshield.  If this is an issue, we can provide different mounts to attach the tower bimini top directly to your boat if needed.  However, this may affect the width you will need to order, so please call us to discuss this option before you order your MT1 Tower Bimini Top.

Because this product is custom made to order based on your color selection and size specifications, this product is non-returnable.  Please measure carefully.

Ready to Order your MT 1 Monster Tower Bimini Top?

Color Options

The following Sunbrella™ colors are available for your MT1  Monster Tower Bimini Top:

     
Forest Green Sunflower Yellow Cadet Grey 
     
Jet Black Mediterranean Blue Captain Navy
     
Jockey Red  Burgundy Linen

Please note that the colors above are for reference only and viewing on a monitor can influence the appearance.

There is an additional $50 charge and one week additional lead time for colors not shown above. Please give us a call and we'll see if Great Lakes Boat Top had the color you want. They carry many of the Sunbrella™ colors but not all of them. Visit Sunbrella to learn more about this top quality fabric that is very popular for bimini tops.

Size Options

 Size

 Width Between
Rear Heim Joints

 Bimini Size

SMALL

69" - 75"

61" Wide x 59" Long

MEDIUM

76" - 82"

65" Wide x 59" Long

LARGE

83" - 89"

69" Wide x 59" Long

X-LARGE

90" - 96"

73" Wide x 59" Long

Shipping and Support Information

IMPORTANT:  To prevent delivery delays, please add a note during checkout to indicate if this is being shipped to a commercial or residential address.  If your delivery address is a residence, you must provide a valid phone number where you may be reached to schedule the delivery.  Since this is a third party product there is no way to guarantee delivery by a certain date.

Monster Tower is a reseller of bimini tops manufactured by Great Lakes Boat Top Company.  They designed the Bimini sold here to fit the Monster Tower.  Although we are your front line support on this product, all warranty related decisions will made by the manufacturer at their discretion.

Order your MT 1 Monster Tower Bimini Top here!

Should you have any other questions about measuring for your MT1 Bimini Top please call us at 1-877-778-6937.